Welcome天际登入为梦而年轻!

热搜词:冷凝器  冷凝器厂家  列管式冷凝器  不锈钢冷凝器  半盘管反应釜  搪瓷设备  储罐  

当前位置:
首页 > 技术知识

解析不锈钢冷凝器如何进行日常维护技巧

人气:21 评论:0 日期:2019-01-03 08:31:10

不锈钢冷凝器具有优良的机械性能,可承受较高的工作压力,也可承受块状固体物料加料时的冲击;耐热性能好,工作温度范围广,具有很好的耐腐蚀性,传热效果好,升降温速度快。 按反应温度的高低分为高温树脂冷凝器(150℃-300℃)和低温树脂冷凝器(60℃-150℃),醇酸树脂冷凝器属高温树脂冷凝器,氨基酸树脂冷凝器、丙烯酸树脂冷凝器和乳液冷凝器属低温树脂冷凝器。

Stainless steel condenser has excellent mechanical properties, can withstand high working pressure, can also withstand the impact of bulk solid material feeding; good heat resistance, wide working temperature range, good corrosion resistance, good heat transfer effect, fast temperature rise and fall. According to the reaction temperature, it is divided into high temperature resin condenser (150 -300 C) and low temperature resin condenser (60 C -150 C). The alkyd resin condenser is a high temperature resin condenser, amino acid resin condenser, acrylic resin condenser and emulsion condenser are low temperature resin condensers. 不锈钢冷凝器广泛应用于石油、化工、橡胶、染料、医药、食品,用来完成硫化、硝化、氢化、烃化、聚合、缩合等工艺过程。

Stainless steel condenser is widely used in petroleum, chemical industry, rubber, dyestuff, medicine and food. It is used to complete sulfurization, nitration, hydrogenation, alkylation, polymerization, condensation and other process.

不锈钢冷凝器具有这么多的优点,被应用于多种行业中。那么不锈钢冷凝器要怎样进行维护呢?

Stainless steel condenser has so many advantages that it has been used in many industries. So how to maintain the stainless steel condenser?

1、首先要经常注意整台设备和减速器的工作情况;

1. First of all, we should pay attention to the working condition of the whole equipment and the reducer.

2、电加热介质油每半年要进行更换;

2. Electric heating medium oil should be replaced every six months.

3、减速器润滑油不足应立即补充;

3. Insufficient lubricating oil of reducer should be replenished immediately.

4、对夹套和锅盖上等部位的安全阀、压力表、温度表、蒸馏孔、电热棒、电器仪表等要应定期检查:如果有故障要即时调换或修理。

4. The safety valve, pressure gauge, thermometer, distillation hole, electric heating rod and electrical instrument at the upper parts of jacket and pot cover should be inspected regularly. If there are any faults, they should be replaced or repaired immediately.

5、设备不用时,一定用温水在容器内外壁清洗,经常擦洗锅体,保持外表清洁和内胆光亮,达到耐用的目的。

5. When the equipment is not in use, it must be washed with warm water on the inside and outside of the container, and the pot body is often scrubbed to keep the appearance clean and the inner liner bright, so as to achieve the purpose of durability.

使用不锈钢冷凝器需要注意的事项如下:

The matters needing attention in using stainless steel condenser are as follows:

1、在使用前必须要关闭冷媒进管阀门;

1. The refrigerant inlet valve must be closed before use.

2、开动搅拌器,再输入物料,然后开启蒸汽阀门和电热电源;

2. Turn on the agitator, then input the material, and then open the steam valve and the electric and thermal power supply.

3、到达所需温度后,应先关闭蒸汽阀门和电热电源,过2~3分钟后,再关搅拌器;

3. After reaching the required temperature, the steam valve and the electric and thermal power should be closed first, and then the agitator should be closed after 2-3 minutes.

4、加工结束后,放尽锅内和夹套剩余冷凝水后,应尽快用温水冲洗,然后用40~500C碱水在容器内壁清洗,以达到耐用的目的。特别锅内无物料(吸热介质)空锅情况下,不得开启蒸汽阀门和电热电源,5特别注意使用蒸汽压力,不得超过定额工作压力。

4. After processing, after discharging the remaining condensate in the pot and jacket, rinse with warm water as soon as possible, and then clean the inner wall of the container with 40-500C alkali water to achieve durability. When there is no material (heat absorbing medium) in the special pot, the steam valve and electric power supply shall not be opened. 5. Special attention shall be paid to the use of steam pressure, which shall not exceed the quota working pressure.

辛苦整理!转载请注明来自 http://www.nxlky.com/n1b/3044.html

相关文章

技术知识

联系中骐石化

0510-85390527

  • 13806182781 钱君
  • 0510-85390227
  • qianjun@nxlky.com
  • 无锡市惠山区钱威路225号